Australian made · Stocked in Queensland · Ships Australia-wide Matching caps, corners and Fixtech on the same order
Cart 0
AUSTRALIAN MADE GUNWALE RUBBER

Gunwale rubber that finishes the boat.

30mm, 35mm and 40mm push-on, 40mm Coex, and the 31mm insert system. Cut per metre or take a pre-cut set. Matching caps and Fixtech sit with the rubber so the run looks built, not patched.

Choose your profile See the 31mm colour system
Australian made 30 · 35 · 40 · Coex · 31mm insert From $120.00 Freight confirmed on the product
01 HOMEPick the family
02 RANGEColour and length
03 PRODUCTFreight + extras
04 CHECKOUTCaps and Fixtech if missing
Gunwale profiles

Gunwale rubber profiles that sit on real hulls

Measure the existing rub rail, match the millimetre, then pick black, white or a 31mm colour combo. Every family below is Australian made and stocked in Queensland — per metre for a tight run, or a 10, 12, 15 or 20 metre set where that length is cut.

Push-on rubber on the hull Push-on rubber on the hull
Cap finishing the run Cap finishing the run
On the water On the water
1
30mm push-on rubber
Push-on · Small caps

30mm

The tight, compact edge for tinnies and smaller runabouts.

Black · White
Per m · 10 / 12 / 15 / 20m
$120.00 from
Shop 30mm
2
35mm push-on rubber
Push-on · Medium caps

35mm

The everyday replacement size. Most boats land here.

Black · White
Per m · 10 / 12 / 15 / 20m
$120.00 from
Shop 35mm
3
40mm push-on rubber
Push-on · Large caps

40mm

A heavier sight line and more face for larger hulls.

Black · White
Per m · 10 / 12 / 15 / 20m
$120.00 from
Shop 40mm
4
40mm Coex
Coex · Large caps

40mm Coex

White body, black sight line built in. Same large caps as 40mm.

White / Black
Per m · 12 / 15 / 20m · no 10m
$120.00 from
Shop Coex
5
31mm insert system
Two-part · Small caps

31mm Insert

One base. Your colour. Combos, base-only or infill-only.

8 combos
Base to 15m · combo to 12m
$120.00 from
Build your colour
Then choose how you buy it

Per metre for a precise run. Pre-cut when you want it simple.

Per metreOrder the exact run.
10m setFor selected profiles.
12m setFull-range pre-cut.
15m setLonger hulls.
20m setLongest standard set.
31mm insert system

One base. Your colour.

This is the family with the options. Start with a black or white base, then lock in the insert — or buy the pair as a combo. Spare infills are sold per metre if you only want a colour change. Finish with the small 30mm caps.

Black / Red
Black / Blue
Black / Black
Black / White
White / Red
White / Blue
White / Black
White / White
31mm insert system colour options
Accessories

Caps and adhesive that finish the gunwale

A raw cut never looks finished. Small 30mm caps close 30mm rubber and every 31mm insert job. Medium 35mm caps close 35mm. Large 40mm caps close 40mm and Coex. Fixtech 15 Black or 16 White bonds the profile to the hull. Add them with the rubber, or at checkout if they are still missing.

31mm only

Infills

White, black, blue or red. Per metre. From $120.00.

Sold as a pair

End caps

Small for 30mm and 31mm. Medium for 35mm. Large for 40mm and Coex.

Sold as a pair

Corner caps

Same size ladder as the end caps, so the corners match the run.

Every profile

Fixtech

15 Black or 16 White. The product page defaults to the body colour.